Car detailing and valeting

In order to carry your motorcycle safely in the bed of your truck, whether you’re going to the track, the trail, or a bike show, motorcycle loading ramps are a real necessity. That’s especially true if you have a lot of money tied up in your bike. To protect your investment, you should seriously consider getting a quality loading ramp.

It’s important to use the right ramp for loading and unloading. One important factor to look at is the height from the ground right up to the truck bed. Another factor is the size and the weight of the bike. The rule of thumb is that the heavier the bike, the more of a challenge it can be loading or unloading. The risk of any damage occurring can be lessened considerably by using the right ramp.

Motorcycle loading ramps are made from metal, quite often aluminum. To get the best traction, ramps frequently have either a kind of textured surface or else holes at equal intervals along the ramp.

A really nice feature to go for, especially if you usually ride your bike on and off the back of the truck, is a safety strap. The strap is designed so it attaches to the back of your vehicle to prevent the ramp from slipping during loading.

Many better ramps have rubber padding on the end that sits against the truck. This padding is useful in preventing scratching and slippage.

When you’re looking for a ramp, you’ll find that there are basically two main types of motorcycle loading ramps.

First of all is the non folding kind of ramp. This kind of ramp is most often made as one single, long, straight span. The material of choice is aluminum. That’s because an aluminum loading ramp can handle loads of 500 pounds or greater. Aluminum is the ideal material to use for a ramp as it’s both strong and yet is lightweight enough to be maneuvered easily when you’re by yourself. Spans on these ramps are frequently perforated. That’s so you have better traction when loading a motorcycle.

A second type is a folding ramp. Folding ramps are made so you can fold them into two or three sections. For that reason, they are easy to set up and are equally easy to store. Folding motorcycle ramps are often rated for a greater weight capacity than are comparable non folding ramps. Because of that they’re just right when it comes time to load larger motorcycles or bigger ATVs, especially when you need some extra width.

With folding ramps, aluminum remains the most commonly used material. Not only is it strong, but it’s much lighter to maneuver around compared to ramps made with heavier metals. In addition, aluminum also stays rust free.

Also available are ramp extenders. With ramp extenders, you have an inclined ramp along with a bed extender. This can come in very handy when your cycle is too long for the bed of your pickup truck.

Motorcycle loading ramps are available in many different styles and designs. With the many added features available, they can make loading or unloading your bike, both easy and safe.

To get your bike or ATV to the trail or track, you’ll need to load it up in the back of your pickup. This is another place where it pays to be safe. Don’t trust your expensive motorcycle or 4 wheeler to a mickey mouse ramp. Check out the solid motorcycle loading ramps at aluminumloadingramp.org as well as the huge selection of ATV loading ramps.