Washing, Waxing and Polishing Your Car
If you wish to maintain your car in a good condition then you will need to know ways to rinse, wax and shine it. Valeting your car frequently will help keep it looking great, but will also preserve the paint and finish from the ravages of time, the weather and the natural environment.
The Equipment and Methods
All of the worn out cloths and sponges you’ve used to wash your car before have to be thrown out. The best choice here is a very soft, wool wash glove. Do not make the blunder of guessing you’ll wash your car with any sort of old thing. Real wool wash mitts retain far more water and shampoo, but they’re also your best option for cleaning the exterior of your car without damaging it.
Along with your new woolen wash mitt, use a two bucket method. One of the buckets will contain clear, clean water and the additional should have the mixture for cleaning. When you are rinsing your wash mitt, use the clean water to make sure that you’re not moving the dirt back on top of the vehicle. This really boosts the performance of both the shampoo and water mixtures.
One more quick hint – ensure you have got a bucket guard. Bucket guards enable dirt to drop through them, but prevents you from picking it up again. Keep in mind, you will find far better results if you are working with a high quality shampoo. After you’ve finished cleaning your car, be sure you’ve got a PVA and / or microfibre towel to dry it well.
Washing and Drying
Park your vehicle in the shade when you begin washing. The very first goal is rinse your car once so that the dirt will become simpler to remove. Start cleaning your car from the top down – begin with the roof, and use straight, overlapping actions here. Rinse each place through when you have washed it. While rinsing, have a slow flow of water – don’t use any high pressure.
Start using two decent towels to dry your vehicle. Carefully stroke the surface of your car with the towel, rather than scrubbing it dry. The towels will carry a lot of the water so you will need to drain them often to allow them to be more helpful. The first of the two towels will take in the majority of the water. When it’s saturated, make use of the second towel to dry up any remaining water droplets on your car.
Polish and Wax
Polishing will be the next stage here. To get the best results you will need to work with a nonabrasive polish. You may also want to use a few various kinds to get the perfect shine. Polishing regenerates your car’s paint to a superior shine by getting rid of any small flaws.
A power car polisher may be used to make sure your polish is used the right way. It’s tough to produce the same results manually. Make sure to avoid hurrying while polishing. Work steadily and within 2 by 2 foot zones.
Finish off your polishing process by going side to side to guarantee the whole space is always coated. As you’re polishing, be sure the polisher’s pad is level all of the time – the side of the pad can harm your finish. Working with wax (have a decent artificial or carnauba wax) is much like polishing, and can be performed by hand or with the aid of the electric polisher. Hand waxing is often the better decision, though.
If you happen to keep to the whole car valeting process often, you can be certain that your vehicle will always be looking amazing at all times.
Want to find out more about car valeting, then visit our Car Valeting HQ website for more car cleaning guides.